Compressor Drive Belt – Adjusting 1 Park the machine on firm level ground. Raise and block JCB Electronic Service Tool...
Compressor Drive Belt – Adjusting 1 Park the machine on firm level ground. Raise and block JCB Electronic Service Tool...
Note: The procedures for refrigerant charging and discharging must only be carried out by qualified service personel who have received...
Note: The refrigerant is heavier than air and will leak downwards from the defective component. Check in still conditions but...
R-134a Refrigerant Due to environmental concerns, the use of ozone depleting chlorofluorocarbons (CFCs) in air conditioning systems is being gradually...
The slide hammer kit is used to remove pivot pins that must be extracted, i.e. cannot be ‘knocked through’. The...
service and every 500 hours. Check and Adjust JCB Electronic Service Tool Diagnostic Kit High Quality 1 Park the machine...
Inspection (1000 hours) When the wear pads are worn to 6 mm (0.23 in) or below they should be replaced....
The slide hammer kit is used to remove pivot pins that must be extracted, i.e. cannot be ‘knocked through’. The...
The hose burst protection valves (if fitted) prevent the loader or backhoe falling in the event of a hose burst....
Compressor Drive Belt – Adjusting Park the machine on firm level ground. Raise and block the loader arms. Lower the...