1 Park the machine on firm level ground, engage the parking brake and set the transmission to neutral. Lower the...
How to drain sediment from the JCB Loader settling bowlHow to drain sediment from the JCB Loader settling bowl
Tag: JCB
How to check the foot brake fluid level using JCB LoaderHow to check the foot brake fluid level using JCB Loader
! WARNING Faulty brakes can kill. If you have to add oil to the brake reservoir regularly get the brake...
How to adjust the JCB bucket loader engine fan beltHow to adjust the JCB bucket loader engine fan belt
Adjusting the Fan Belt ! WARNING Make sure the engine cannot be started. Disconnect the battery before doing this job....
How to inspect and change the oil and filter in the synchronous shuttle gearbox of a JCB bucket loader.How to inspect and change the oil and filter in the synchronous shuttle gearbox of a JCB bucket loader.
Checking the Oil Level 1 Make sure the park brake is engaged and the transmission set to neutral. Lower the...
How to check and change the coolant in a JCB bucket loaderHow to check and change the coolant in a JCB bucket loader
! WARNING Make sure the engine cannot be started. Disconnect the battery before doing this job. 2-3-3-5 1 Park the...
How to check the foot brake fluid level on a bucket loader with a rear shovelHow to check the foot brake fluid level on a bucket loader with a rear shovel
! WARNING Faulty brakes can kill. If you have to add oil to the brake reservoir regularly get the brake...
This article explains how to adjust the wear pads of the extended bucket of a JCB backhoe loaderThis article explains how to adjust the wear pads of the extended bucket of a JCB backhoe loader
This article explains how to adjust the extended bucket wear pads for 3CX – 4CX – 214 – 214e –...
How to correctly install a glass panel glued to the cab frame hole on a JCB 3CX – 4CX – 214 – 214e – 215 – 217 backhoe loaderHow to correctly install a glass panel glued to the cab frame hole on a JCB 3CX – 4CX – 214 – 214e – 215 – 217 backhoe loader
Preparing the Cab Frame Aperture 1 If damp or wet, dry the aperture area using a hot air gun (sourced locally)....
How to properly remove the old bonded glass panel from the backhoe loader cab frame holeHow to properly remove the old bonded glass panel from the backhoe loader cab frame hole
How to correctly remove and install a glass panel glued to the cab frame hole on a JCB 3CX –...
How to adjust the air conditioning compressor drive belt on a JCB 3CX – 4CX – 214 – 214e – 215 – 217 backhoe loaderHow to adjust the air conditioning compressor drive belt on a JCB 3CX – 4CX – 214 – 214e – 215 – 217 backhoe loader
1 Park the machine on firm level ground. Raise and block the loader arms. Lower the backhoe to the ground and...