1. Preparation:
– Crankshaft oil seal removal tool
– Crankshaft oil seal installation tool
– New crankshaft oil seal (P/N: 20459168)
– Wear sleeve (P/N: 20740023)
– Silicone grease (P/N: 1161325)
Deutz Communicator DECOM Diagnostic Tool for All Deutz Engine EMR Controllers | SerDia 4.0
2. Rotate the upper structure to the left, positioning it at an angle of approximately 40 degrees relative to the machine’s front, to ensure sufficient space for removing the cover plate beneath the engine.
3. Turn off the battery master switch to prevent anyone from starting the engine.
4. This oil seal replacement procedure requires two people to perform the work.
