This article describes how to install the Isuzu 4JH1 engine mount (left)
09.2024 ISUZU E-IDSS Diagnostic Software Download and Installation Service
1.Installthe support rubber.
- Install the support rubber while raising theengine.
- Tightenthefixing nuts to the specified torque.
Tightening torque
Engine foot side: 82 Nm(8.4 kg·m/61 Ib-ft)
Crossmember side:48 N·m(4.9 kg m/35 Ib·ft)
2.Installthe fan shroud.
- Installthefan shroud and clip the reservoir tank hose.
3.Install the air intake pipe and hoses.
- Installthe pipe and hoses between theintake throttle valve and intercooler.
- Useanew hose clamp,align it with the marking,and tighten it at the specified torque.
Tightening torque
Clamp: 8.0Nm(0.8 kg·m/71 Ib-in)
- Fixtheair intake pipe to the bracket.
Tightening torque:20 Nm(2.0 kg-m/177.5 Ibin)
4.Connect the boost sensor connector.(Euro4 specification)
02.2025 ISUZU US-IDSS II Truck Diagnostic System Download and Installation
Legend
1.Boost sensor connector
5.Install the cab.(Non-tilt cab model only) Refer to “FRAME AND CAB”Section 2.
6.Refill the engine coolant.
7.Connect the battery cable negative terminal.
ISUZU IDSS MX2-T Diagnostic Adapter System Support G-IDSS/US-IDSS/E-IDSS（Included DHL Shipping ）
