How to install the Isuzu (4JH1 model) Engine Coolant Temperature Sensor

April 28, 2026April 28, 2026 heavydutydiag 0 Comment

Installation
1.ApplyLoctite262 or equivalent or equivalent to the
threaded portion ofthe engine coolant temperature
sensor and tighten at the specified torque.
Tightening torque:
20 N·m(20 kg-m/14 Ibft)

*2.Connect the engine coolant temperature sensof
connector.
3.Close the engine cover.(Non-tiltcab model only)

4.Refill the engine coolant.
5.Connect the battery cable negative terminal.

 

Related Posts

This article describes the installation requirements for the unit injection pumps on the Deutz BFM1013 diesel engine.

The unit injection pumps used on the BFM1013 diesel engine are critical components of the fuel supply system. Each unit ...

READ MOREREAD MORE

Caterpillar 320D2 Excavator Universal Floating Seal – Installation

Duo-Cone Universal Floating Seal – Installation   Caterpillar ET 2025A & 2019C Electronic Technician Diagnostic Software Download and Installation  Installation Procedures ...

READ MOREREAD MORE

How to remove and install caterpillar 320D2 excavator fuel priming pump and fuel filter base

How to remove and install caterpillar 320D2 excavator fuel priming pump and fuel filter base   Caterpillar ET 2025A & 2019C ...

READ MOREREAD MORE