The pressure switch is located adjacent to the expansion
valve S on the HVAC/air conditioning unit, beneath the right
CB ServiceMaster/WinEEM4 KG v2 Keygen
hand side console.
! WARNING
Goggles and rubber gloves must be worn when pressure
switches are removed or fitted. A small amount of
refrigerant is released which can be harmful to the skin
and eyes.
BF 1-10
Removal
1
Disconnect the battery.
2
Gain access to the HVAC unit by removing the right
03.2026 JCB ServiceMaster 4 v26.3.2 Diagnostic Software with SW Files Download and installatio
hand side console, refer to HVAC/Air Conditioning
Unit – Removal and Replacement Step 2.
3
Disconnect the electrical connections and unscrew the
pressure switch.
Replacement
1
Screw the pressure switch into the pressure switch port
and torque tighten sufficiently to form a gas-tight seal.
2
Run the air conditioning and check the pressure
switches for leaks. If any leaks are found, tighten the
pressure switch further until the leaking stops.
